Our Grip Edge Pull adds a touch of modern sophistication to any contemporary design project. The solid brass construction has an incredible weight in the hand, ensuring it will be long-lasting, and functional. Available in many in-stock finishes and also available in custom finishes (with a longer lead time).
This product is not available in brick and mortar retail stores.
High use areas
Kitchens, bathrooms, furniture
Handmade of solid brass, electroplated in the finish of your choice
When you purchase 2 or more of this piece, each piece is discounted by $5
Savings applied at checkout
Polished Brass (lacquered)
Satin Brass (lacquered)
Oil Rubbed Bronze
Unlacquered Brass, Polished Copper, Satin Copper, Gold, and Pewter
Available upon request
Typical production lead times are 4-6 weeks
Please contact us for an up-to-date lead time and price
Projection: 1 1/2" Height: 1/2" (front edge lip)
Length: Available in 1", 2", 3", 4", 5"
Important fit measurement:
The pull attaches to the back of the cabinet door or drawer front
The back is 1" high (where it attaches to the cabinet)
2 cabinet screws
1 cabinet pull
Shipswithin 10 business daysfrom Seattle, Washington
For new installations,pre-drilling holes is required. Important Note:If you do not pre-drill holes, you risk the screws snapping inside the cabinet. Inspire Hardware is not responsible for any installation issues if these installation instructions are not followed.
Place the edge pull on the cabinet where you would like to install them.
Once you’re happy with placement, from the back of the cabinet door or drawer, use a pencil to mark the screw holes.If you don’t want to mark up your cabinet, you can use a piece of painter’s tape in the area where the screw holes will go, and make the marks on the painter’s tape.
Take your drill and 3/16” drill bit, and set the bit to the depth of the screws provided.
Use the drill to pre-drill holes into the back of the cabinet, taking care not to drill through the front.
Once the pilot holes are drilled in the correct spots, place the pull in the correct spot with the holes aligned.
Use a screwdriver to tighten the screws into the cabinet.If using a drill for the step, there are risks to stripping the screws or snapping them in the cabinet, therefore it is recommended to use a screwdriver.