Studio photograph of Sunbeam, Solid Brass Cabinet Pulls.

Choosing Modern Cabinet Pulls

The long grip and shaped supports of the Sunbeam cabinet pull give a cabinet front a repeated architectural line.

A row of cabinet pulls is a drawing repeated across the room. Change the length, the ends or the reflection, and the same cabinetry can read differently. That makes the pull worth choosing while the elevation is still being considered.

Modern does not describe one mandatory shape. It can be a straight line, a softened curve or a small sculptural form. The useful question is what that shape contributes to the cabinet and the way it is used.

Look at the outline before the finish

A round bar and a rectangular bar may occupy similar dimensions but give different highlights and shadows. A broad flat face has another kind of presence. Compare the full shape, including the ends and mounting bases.

An edge pull moves much of that detail to the boundary of the front. It can leave the cabinet face quieter, provided the mounting, gap and finger access suit the construction.

A half-moon or another curved form can interrupt the repeated rectangles deliberately. It needs enough space and an appropriate fixing surface, not simply a large blank area in a rendering.

Decide how the hardware will repeat

Map the working doors and drawers. One pull family throughout can create a clear pattern, but the size may change where the fronts differ substantially.

Pulls on drawers and knobs on doors offer another arrangement. It can follow different grips while keeping a relationship through finish or profile. Neither arrangement is inherently more modern.

Try to give each variation a reason. A wide drawer, a narrow door and a tall pantry may justify different pieces. Small dimensional differences between otherwise similar fronts may not need a new size every time.

Separate visible size from the fixing

Center-to-center spacing describes the distance between mounting-hole centers. Overall length describes the visible span. A pull can fit existing holes and look quite different from the old one.

On a replacement project, measure the holes accurately and keep the stated units. Check the new base coverage and any marks left by the previous hardware. A similar outside length does not establish interchangeability.

For new work, compare full-size outlines on the elevation, then give the installer the exact selected drawing. Include projection and the mounting footprint as well as the two length measurements.

Try the grip as an installed object

A pull's underside and clear hand opening are difficult to judge from a front photograph. Mount or hold the sample against a representative surface and approach it as it will be used.

Check a drawer with its intended contents, within the cabinet system's capacity. If the action is stiff or uneven, address the mechanism. More handle length does not automatically correct the way the drawer runs.

Tall pantry doors and appliance panels need separate consideration. Their similar appearance does not make their operating requirements identical. Appliance hardware must be compatible with the exact equipment and panel arrangement.

Use finish to adjust the presence

A polished finish can make a slim piece visible through light. A darker surface may outline itself against pale cabinetry or recede into a dark front. Brass can add warmth without requiring the rest of the room to share the same color.

Compare actual samples beside the cabinet, counter and nearby fittings. A matching finish name across suppliers is not proof of an exact match. A considered contrast may be easier to resolve than several almost-matching surfaces.

Read the construction and care details too. Solid brass describes the body, while coating and texture determine other aspects of appearance and maintenance. Weight alone cannot establish the quality of the complete piece.

Approve placement before repeating it

Show the intended position across a representative drawer stack and door pair. A centered position and a repeated offset from the top can produce different patterns when fronts vary in height.

Check the material behind the fixing points, front thickness and correct fasteners. Open neighboring fronts fully and look for collisions with walls, other pulls and appliances. Projection affects the room as well as the grip.

Use an appropriate template or jig only after the position and actual product are confirmed. One checked installation is a better reference than a setting copied from an untested drawing.

The result can be quiet or expressive. What makes it convincing is that the repeated shape belongs to the elevation and feels right at the hand, with the dimensions and mounting understood before the first row of holes is made.

Continue with How to Inspire

How to Pair Hardware with Cabinetry

Back to blog