FREE Standard Shipping in the US, including Alaska, Hawaii, Puerto Rico, Guam, & US Virgin Islands. We also ship to Canada


Curve Pull, Satin Brass Cabinet Pull - Inspire Hardware
Curve Pull, Satin Brass Cabinet Pull - Inspire Hardware
Curve Pull, Satin Brass Cabinet Pull - Inspire Hardware
Curve Pull, Satin Brass Cabinet Pull - Inspire Hardware
Curve Pull, Satin Brass Cabinet Pull - Inspire Hardware
Curve Pull, Satin Brass Cabinet Pull - Inspire Hardware
Curve Pull, Satin Brass Cabinet Pull - Inspire Hardware
Curve Pull, Satin Brass Cabinet Pull - Inspire Hardware
Curve Pull, Satin Brass Cabinet Pull - Inspire Hardware

Curve Pull, Satin Brass Cabinet Pull

Regular price
$16.00
Sale price
$16.00
Regular price
Sold out
Unit price
per 
Trust BadgesInspire Hardware BBB Business Review

Trust Badges


Curve is an ageless, gracefully designed brass cabinet edge pull.

  • This product is not available in brick and mortar retail stores.

Perfect for:

  • High use areas
  • Kitchens, bathrooms, furniture

Materials and Finishes:

  • Solid brass with satin brass finish.

Dimensions:

  • H: 0.8" L: 2.4" C-C: 1.6"
  • Tear sheet available here.

Important fit measurement:

  • The back is 7/8" high (where it attaches to the cabinet)

Included:

  • 2 cabinet screws (1/2" length)

Shipping:

  • Ships within 2 business days from Seattle, Washington

Shop with Confidence!

  • If you don't love the item simply return it.
  • See our comprehensive return policy here.

Need samples?

Installation Instructions (click here) or see below:

  • For new installations, pre-drilling holes is required. Important Note: If you do not pre-drill holes, you risk the screws snapping inside the cabinet. Inspire Hardware is not responsible for any installation issues if these installation instructions are not followed.
  • Steps:

    1. Place the edge pull on the cabinet where you would like to install them.
    2. Once you’re happy with placement, from the back of the cabinet door or drawer, use a pencil to mark the screw holes. If you don’t want to mark up your cabinet, you can use a piece of painter’s tape in the area where the screw holes will go, and make the marks on the painter’s tape.
    3. Take your drill and 3/16” drill bit, and set the bit to the depth of the screws provided.
    4. Use the drill to pre-drill holes into the back of the cabinet, taking care not to drill through the front.
    5. Once the pilot holes are drilled in the correct spots, place the pull in the correct spot with the holes aligned.
    6. Use a screwdriver to tighten the screws into the cabinet. If using a drill for the step, there are risks to stripping the screws or snapping them in the cabinet, therefore it is recommended to use a screwdriver.
    7. Stand back and enjoy your new hardware!

Inspire Hardware on Houzz

Inspire Hardware BBB Business Review
x

×
Welcome Newcomer

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods